Please use this identifier to cite or link to this item: http://dspace.ensta.edu.dz/jspui/handle/123456789/698
Title: Virtual Realization of a Quadcopter - Manipulator Under ROS/Gazebo Environment
Authors: IDER, Abdelaziz
REZOUG, Amar (Directeur de thèse)
BAIZID, Khelifa (Directeur de thèse)
Keywords: ROS
Gazebo
Quadcopter
PID
Controller
SolidWorks
Issue Date: 2023
Publisher: ENSTA
Abstract: This project describes the work done to develop a test platform for control algorithms in quadcopters with robotic arm attached to it (Unmanned Aerial Vehicle Manipulator System). The quadcopter chosen was a custom drone modeled and inspired from DJI F450 Drone using Solidworks, therefore, all the model parameters used. In order to implement a low-level controller, an available architecture drone package was reformulated in order to assign the forces applied directly to the drone instead of the motor velocities, due to simulation conditions. Moreover, a controller was implemented doing the time synchronization between ROS and Gazebo. The algorithm chosen was a Cascaded PID due to its simplicity compared to other robust control algorithms, The controller, attached to the model, shows a very good result being able to perform a stable hovering at given position and altitude and moving the robot arm to desired configuration.
Description: Projet de fin d’étude d'ingéniorat: Systèmes Embarqués : Alger: Ecole Nationale Supérieure des Technologie Avancées: 2023.
URI: http://dspace.ensta.edu.dz/jspui/handle/123456789/698
Appears in Collections:PFE- Système Embarqués

Files in This Item:
File Description SizeFormat 
PFE- IDER Abdelaziz.pdfProjet d'ingéniorat21.52 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.